Världsledande företag med extremt bra kvalitet. Direkt från tillverkaren utan mellanhandel, vilket ger ett mycket attraktivt pris!
Denna modell kan enkelt kopplas direkt på regulatorn utan större modifikationer.
CO2 – overnight shut down solenoid valves for the aquaristic market
The main advantages of our solenoid valves of the series is that fast acting time or outstanding hygienic assets are more important for branches like medical engineering, beverage production or automotive technology.
These advantages are not important for the aquaristic market, but there are 4 other reasons which made the BMV to the leader in this branch:
- Due to the high efficiency of the BMV the valves open safely at a pressure < 5,5bar already with 0,8W input. Such a low consumption of energy will not be reached by the competition.
- By using the valves with alternating current (AC) there may be an annoying buzzing due to the frequency of the power (in Europe 50 or 60 Hz). This happens because the movable plunger in the solenoid valve moves around its axis at every on/off turn and in special positions the plunger starts to swing . A higher input will produce a higher magnetic power, which will eliminate such swing and noise, but it will lead to very hot coils. This is not suitable for the aquaristic market. Therefore Bavaria FluidTec GmbH has developed a patented stabilized control device which is integrated in the connected plug. This device is changing the AC into direct current (DC). Even the valves are connected to the 230V AC power supply there will be only a pulsating DC arriving at the coil. Due to this our solenoid valves don’t buzz anymore in spite of the low power input. Therefore the warming of the coil remains also very low. Sometimes end user discuss that the energy consumption of our valves is higher than we declare on the coils. But in fact the moving-coil testing instruments you find in the market to check it, are not able to measure the real input because of the pulsating DC.
- The aquaristic solenoid valves of the series BMV are generally delivered with push on fittings and cap nut. But if you want to connect the valve directly to the manometer or needle valve you only may dismount the inlet part of the solenoid valve with a 13 mm key. Then the inlet of the valve is male threaded G1/8” and you can connect it to the needle valve or manometer, which usually have the same threading. In case you want to use the pipe connection later again, you can remount the inlet part, which has an implemented O-ring that will not be lost in the meantime.
- On request the aquaristic valves of the series BMV are also available with an integrated non-return valve.
Especially these 4 reasons made our solenoid valves BMV to the leading valves in the CO2 market worldwide.